全自动小U弯管机
Automatic small U tube bending machine
1、 本机是生产空调短U弯零件的全自动专用设备，通过更换模具及导向零件，可弯制Φ7～Φ15.88的铜管。
2、 该机的送料、夹紧送芯、锯切弯由采用气缸或没缸驱动，电器及气动元件均采用进口或名牌产品。
3、 该机同时加工两条铜管，全自动生产效率高、工作性能平稳，是生产短U产品的理想设备。
1. The machine is automatic equipment specially used for the production of short U bending parts of air condition. By replacing dies and guiding parts, copper tubes with diameter of 7~15.88mmcan be bent.
2. The feeding, clamping for core transmitting and sawing of the machine are driven by cylinder. Electrical and pneumatic components are imported or brand products.
3. The machine can be used to automatically process two copper tubes at the same time with high efficiency and stability. It is the ideal equipment for the production of short U products.
主要性能参数 Main parameters:
|
设备型号model of the equipment |
SUW-II |
SUW-VI |
|
产品规格product specifications |
Φ7-Φ18厚度 wall thickness:0.35～1.0mm |
Φ7-Φ19.5厚度 wall thickness:0.35～0.6mm |
|
弯曲位厚度变化率thickness change rate of bending part |
≤30% |
≤30% |
|
管口扁平率flat rate of tube ends |
≤10% |
≤10% |
|
毛刺高度burr height |
﹤0.3MM |
﹤0.3MM |
|
高度尺寸height dimension |
Φ7-Φ9.52 2件pcs; Φ12.7-Φ18 1件pcs |
±0.5 |
|
同步加工工件数quantity of work pieces processed simultaneously |
5-7s |
5件pcs |
|
生产节拍production frequency |
0-1860 |
5-8s |
|
弯形角度 bending angle |
0.37KW |
0-1861 |
|
切断电机功率 power of cutting motor |
0.45-0.6Mpa |
0.38KW |
|
气源 gas source |
0.45-0.6Mpa |
0.45-0.7Mpa |
|
电源power |
三相380V 3phases 380V |
三相380V 3phases 380V |
|
主机外形尺寸（长*宽*高）extemal dimension of host (L*W*H) |
1550*750*1500MM |
1550*750*1501MM |
|
整线长度 Whole line length |
7M |
8M |