全自动长U弯管机
Automatic long U tube bending machine
全自动长U 管弯管机设备是将卷盘料铜管经由主动放料、校圆、校直、送料、定尺无屑切割、折弯、退料等全自动工作程序完成，除人工装盘管和人工引料之外的长U 管弯制工作。
The automatic long U tube bending machine is used to complete the bending work of long U-tube, except for the manual installation of coil and manual feeding, by means of automatic working procedures such as active discharging, straightening, feeding, cutting, bending and returning.
参数说明 technical parameters:
|
铜管规格 Specification of copper tube |
铜管为T2M，TP2M每次折4根，壁厚0.22-0.41 Copper tubes ae TP2M folds 4 pcs each time;wall thickness 0.22-0.41 |
|
中心距centre distance |
±0.1mm |
|
折弯后工件长度length of work piece after bending |
220～2200mm |
|
折弯速度（L ≤300时）bending speed (when L ≤300) |
L ≤300 :t < 8 - 12 秒/S |
|
1）弯曲部椭圆度ovality of bending part |
2.5%以内 within 2.5% |
|
弯曲部减薄率thinning rate of bending part |
10%以内 within 10% |
|
弯曲后端口差 difference of tube ends after bending |
1.0mm以内within1.0mm |
|
控制方式 control mode |
PCL控制+触摸屏 Controlled by PCL+touch screen |
|
电源power |
380V三相 50Hz 380V 3phases 50Hz |
|
液压系统压力pressure of hydraulic system |
0～7Mpa |
|
外形尺寸（长*宽*高）extemal dimension (L*W*H) |
4200*1040*1350mm(供参考For reference) |